subject
Physics, 18.10.2021 08:30 mem8163

I NEED THIS TO RAISE MY GRADE TO A B A cannonball is shot and lands on top of an 80-meter hill. The initial velocity of the cannonball is fired at 100m/s at an angle of 30 degrees. the end of the cannon is 2 meters off the ground
a. how long is the cannonball in the air?
b. what is the final velocity of the cannonball just before it hits the ground?

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:30, asco0317p34v1s
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
image
Physics, 22.06.2019 06:30, bluevibe
2kg of refrigerant 134a undergoes a polytropic process in a piston-cylinder assembly from an initial state of saturated vapor at 2 bar to a final state of 12 bar, 80 degree c. a)determine the work for the process in kj. b)sketch the process on a p-v diagram.
Answers: 2
image
Physics, 22.06.2019 10:30, jadenp23
Which two particles are found in the center of an atom
Answers: 1
image
Physics, 22.06.2019 13:00, help1572
Aplayground merry-go-round has a radius of 4.6 m and a moment of inertia of 200 kg-m2 and turns with negligible friction about a vertical axle through its center. a child applies a 26.0 n force tangentially to the edge of the merry-go-round for 15.0 seconds. if the merry-go-round is initially at rest, how much work did the child do on the merry-go-round?
Answers: 1
You know the right answer?
I NEED THIS TO RAISE MY GRADE TO A B A cannonball is shot and lands on top of an 80-meter hill. Th...

Questions in other subjects:

Konu
History, 21.03.2020 03:30