Consider a copper wire with a diameter of 0.450 mm. if you want to cut a piece of the wire so it has a resistance of 3.25 ω, how long should your piece of wire be? (resistivity of copper: 1.68x 108 ω m) a. 0.343 m b. 9.79 m 13. c. 2.91 m d. 123 m e. 30.1 m

Awind turbine is initially spinning at a constant angular speed. as the wind's strength gradually increases, the turbine experiences a constant angular acceleration 0.173 rad/s2. after making 2870 revolutions, its angular speed is 132 rad/s. (a) what is the initial angular velocity of the turbine? (b) how much time elapses while the turbine is speeding up?

Imagine you had to physically add electrons, one at a time, to a previously neutral conductor. you add one electron very easily, but the second electron requires more work. in your initial post to the discussion, explain why this is. also, what happens to the work needed to add the third, fourth, fifth, and subsequent electrons

Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.