Engineering, 10.08.2021 01:00 Starlightdust5314

The single-phase half-bridge inverter has a resistive load of R=2.4 2 and the de input voltage is Vs =48V. Determine (a) the ms output voltage at the fundamental frequency Voi.(b) the output power (c) the average and peak currents of each transistor. (d) the peak reverse blocking voltage and current of each transistor, (e) the THD. (f) the HF and of the LOH

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, aliopqwas

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

You know the right answer?

The single-phase half-bridge inverter has a resistive load of R=2.4 2 and the de input voltage is Vs...