Engineering, 04.06.2021 16:40 emj70

A house is on a hill 10 meters above the base of a 50 meter tall water tower. Calculate the gauge pressure at a tap on the ground floor of the house. Density of water (rho) = 1000 kg/m^3

Acceleration of gravity (g) = 9.8 m/sec^2

Pressure of a fluid column ΔP=ρgΔh

SI units for pressure Pascal = 1 N/m^2 = 1 kg /ms^2

A) 98,000 N/M^2

B) 490,000 N/m^2

C) 588,000 N. m^2

D) 392,000 N/m^2

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 19:20, rosemary909

In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.

Answers: 3

continue

Engineering, 06.07.2019 03:10, iiisavageoreo

Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?

Answers: 2

continue

You know the right answer?

A house is on a hill 10 meters above the base of a 50 meter tall water tower. Calculate the gauge pr...