Engineering, 21.04.2021 21:40 pannita

14b. Describe the finish and method of finish required at the weld required to join the item in 14a.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, ijohnh14

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

continue

Engineering, 06.07.2019 04:10, jessicajustice6215

Cold water (cp=4180j/kg k) leadıng to a shower enters a thin-walled double-pipe heat transfer at 15c at a rate of 0.25kg/s and is heated to 45c by hot water (cp=4190j/kg k) that enters at 100c at the rate of 3kg/s. if the overall heat transfer coefficient is 950w /m2 k , determıne the rate of heat transfer and the heat transfer surface area of the heat exchanger using e - ntu method

Answers: 1

continue

Engineering, 06.07.2019 04:20, BreBreDoeCCx

At what temperature does the mole fraction of no reach 0.010 for the equilibrium products resulting from the combustion of gasoline and air at 1.0 and 5000 kpa?

Answers: 1

continue

Engineering, 06.07.2019 05:10, mel2001love

An ideal vapor-compression refrigeration cycle is employed to maintain a building temperature of 23°c when the outside temperature is 37°c. the cycle operates at steady state using ammonia as the working fluid. the mass flow rate of the refrigerant is 15 kg/min. the refrigerant enters the compressor at 1.5 bar and 10 °c. the condenser pressure is 20 bar and the temperature at the condenser exit is 45 °c. determine (a) the compressor power in kw. (b) the refrigeration capacity in tons. (c) the coefficient of performance. d) the maximum theoretical coefficient of performance.

Answers: 2

continue

You know the right answer?

14b. Describe the finish and method of finish required at the weld required to join the item in 14...