steam of mass 5 kg, contained within a piston-cylinder assembly undergoes an expansion from state 1, where the specific internal energy is u base1=2709.9 kj/kg, to state 2, where u base 2 =2659.6 kj/kg. during the process, there is heat transfer to the steam with a magnitude of 80kj. also, a pedal wheel transfers energy to the steam by working in the amount of 18.5kj. there is no significant change in the kinetic or potential energy of the steam. determine the energy transfer by work from the steam to the during the process, in kj.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s