Engineering, 15.07.2020 21:01 titir15
A thick casting with a thermal diffusivity of 5 x 10-6 m2/s is initially at a uniform temperature of 150oC. One surface of the casting is suddenly exposed to a high-speed water jet at 20oC, resulting in a very large convective heat transfer coefficient (Hint: assume imposed surface temperature). The thermal conductivity of the casting is 20 W/m-K. Determine the temperature 20 mm in from the surface after 40 seconds. Check your answer using an alternative technique. Your final answer should be about 101.3 oC.
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 19:10, nbunny7208
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A thick casting with a thermal diffusivity of 5 x 10-6 m2/s is initially at a uniform temperature of...
Questions in other subjects:
Mathematics, 01.10.2019 21:20
History, 01.10.2019 21:20
History, 01.10.2019 21:20
