Engineering, 14.04.2020 22:21 angelespinosa521

Determine the mean effective pressure of an ideal Otto cycle that uses air as the working fluid if its state at the beginning of the compression is 14 psia and 60°F, its temperature at the end of the combustion is 1500°F, and its compression ratio is 9. Use constant specific heats at room temperature. The properties of air at room temperature are R = 0.3704 psia·ft3/lbm·R, cp = 0.240 Btu/lbm·R, cv = 0.171 Btu/lbm·R, and k = 1.4.

Answers: 1

Show answers

Answers

Answer from: BrainGeek4848

The mean effective pressure of the ideal Otto Cycle that uses air as the working fluid is; 31.28 psia

We are given;

Initial pressure; P₁ = 14 psia

Initial temperature; T₁ = 60°F = 520 R

Maximum temperature; T₃ = 1500°F = 1960 R

Compression ratio = 9

From tables, the specific heat capacities and constants are;

c_v = 0.171 btu/lbm.R c_p = 0.24 btu/lbm.R R = 0.3704 btu/lbm.R ratio of specific heats; k = 1.4

Let us first calculate the initial volume from the formula;

V₁ = RT₁/P₁

V₁ = (0.3704 * 520)/14

V₁ = 13.7577 ft³/lb.m

Compression ratio is; V₁/V₂ = 9

Thus;

V₂ = V₁/9

V₂ = 13.7577/9

V₂ = 1.5286 ft³/lb.m

To get the temperature T₂, we will use the formula;

T₂ = T₁(V₁/V₂)^(k - 1)

T₂ = 520(9)^(1.4 - 1)

T₂ = 1252.277 R

Similarly;

T₄ = T₃/9

T₄ = 1960/(9^(1.4 - 1))

T₄ = 813.87 R

Formula for heat entering and heat exiting are;

Q_in = c_v(T₃ - T₂)

Thus;

Q_in = 0.171(1960 - 1252.277)

Q_in = 121.02 btu/lbm

Q_out = c_v(T₄ - T₁)

Q_out = 0.171(813.87 - 520)

Q_out = 50.251 btu/lbm

Net work done is given by;

W_net = Q_in - Q_out

W_net = 121.02 - 50.251

W_net = 70.769 btu/lbm

Formula for the mean effective pressure is;

mean effective pressure = W_net/(V₁ - V₂)

mean effective pressure = 70.769/(13.7577 - 1.5286)

mean effective pressure = 5.7869 btu.ft³

Converting to psia gives;

Mean effective pressure = 31.28 psia

Read more about compression ratio at; link

Answer from: jaquezdaking4919

The mean effective pressure of the Otto cycle is 31.268 psi

Explanation:

The mean effective pressure is obtained by dividing the work done in the working stroke process of the cycle by the volume of the stroke ar the stroke volume.

In the Otto cycle, therefore, we are to apply an expression for the work done and the volume of the Otto cycle stroke to derive the value of the mean effective pressure as follows.

Here we have the mean effective pressure given by

MEP $\frac{w_{net}}{\alpha _1 - \alpha_1 }$

$= \frac{Heat\, Supplied - Rejected \, Heat}{\alpha_1 -\frac{\alpha_1 }{r} }$

= $\frac{q_{in} -q_{out}}{\alpha_1-\frac{\alpha_1 }{r} }$

$=\frac{P_1}{RT_1} \frac{r}{r-1} (c_v(T_3-T_2)-c_v(T_4 - T_1))$

$=\frac{P_1}{RT_1} \frac{c_v r}{r-1} (T_3(1-r^{1-k})+T_1(1 - r^{k-1}))$

= $=\frac{14\cdot 0.171 \cdot 9}{(9-1)\cdot 0.06855 \cdot 520} (1960(1-9^{1-1.4})+520(1-9^{1.4-1}))$

31.268 psi.

Answer from: Quest

Idon’t know what the answer is i wish i could

Answer from: Quest

answer:

dsfdssdfdssfdsfd

explanation:

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

You know the right answer?

Determine the mean effective pressure of an ideal Otto cycle that uses air as the working fluid if i...