subject
Engineering, 04.03.2020 23:22 jamesgraham577

A tire-pressure monitoring system warns you with a dashboard alert when one of your car tires is significantly under-inflated.
How does this pressure monitoring system work? Many cars have sensors that measure the period of rotation of each wheel. Based on the period of rotation, the car’s computer determines the relative size of the tire when the car is moving at a certain speed.
(a) Derive a mathematical equation that relates the period T of the wheel rotation of the tire radius r and the speed v of the car.
(b) The figure below shows a properly inflated tire (left) and an under-inflated tire (right) of the same car. Estimate the percent change of the period of the underinflated tire compared to the properly inflated tire.
The inflated tire has a radius of 303 mm and the underinflated tire has a radius of 293mm. (Radius is from the ground to center of the wheel.)
(c) Estimate the distance this car would have to travel in order for one wheel to make one more complete rotation than the other. Which will undergo more turns, the under-inflated or the properly inflated tire?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:20, DroctorWellsfan
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
image
Engineering, 04.07.2019 18:20, samantha636
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
image
Engineering, 04.07.2019 18:20, rbgrh9465
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
A tire-pressure monitoring system warns you with a dashboard alert when one of your car tires is sig...

Questions in other subjects:

Konu
Mathematics, 19.08.2019 01:20
Konu
Mathematics, 19.08.2019 01:20