Engineering, 13.02.2020 21:23 AM28
A thin flat plate of length L, thickness t, and width W > L is thermally joined to two large heat sinks that are maintained at a temperature To. The bottom of the plate is well insulated, while the net heat flux to the top surface of the plate is known to have a uniform value of q0"
a) Derive the differential equation that determines the steady-state temperature distribution T(x) in the plate.
b) Solve the foregoing equation for the temperature distribution, and obtain an expression for the rate of heat transfer from the plate to the heat sinks.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A thin flat plate of length L, thickness t, and width W > L is thermally joined to two large heat...
Questions in other subjects:
Mathematics, 07.04.2020 19:55
Mathematics, 07.04.2020 19:55
