Engineering, 07.04.2020 19:54 tommybear989

Steam enters an insulated turbine at 100 bar, 400oC. At the exit, the pressure and quality are 200 kPa and 0.47, respectively. Determine the power produced (kW) by the turbine if the mass flow rate is 1.99 kg/s.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, GusGus11

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

continue

Engineering, 06.07.2019 04:10, ninaaforever

Natural gas (95 percent methane and 5 percent ethane by volume) flows through a 90 cm diameter pipeline with a velocity of 3 m/s. the pressure in the pipeline is 700 kpa, and the temperature is 15°c. calculate: (a) the mass and volumetric flow rates in this pipe.

Answers: 1

continue

Engineering, 06.07.2019 04:20, butt1562

Consider the transfer function for a first-order system g(s)=12(s+7)/(s^2+2s+9) for this system determine: a) poles and zeros of the function, b) the natural frequency and damping ratio, c) the peak value achieved in response to a unit step input, d) the peak time for a unit step input, e) the steady-state system response to a unit step input

Answers: 2

continue

Engineering, 06.07.2019 06:10, winchester729

Which of the following are not related to a materials structure? (mark all that apply) a)- atomic bonding b)- crystal structure c)- atomic number d)- microstructure

Answers: 3

continue

You know the right answer?

Steam enters an insulated turbine at 100 bar, 400oC. At the exit, the pressure and quality are 200 k...