Engineering, 19.12.2019 00:31 ella9288

Compilers can have a profound impact on the performance of an application. assume that for a program, compiler a results in a dynamic
instruction count of 1.0e9 and has an execution time of 1.1 s, while compiler b results in a dynamic instruction count of 1.2e9 and an execution time of 1.5 s.

a. find the average cpi for each program given that the processor has a clock cycle
time of 1 ns.

b. assume the compiled programs run on two different processors. if the execution
times on the two processors are the same, how much faster is the clock of the
processor running compiler a’s code versus the clock of the processor running
compiler b’s code?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 05.07.2019 04:30, kookycookiefanx

Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?

Answers: 2

continue

You know the right answer?

Compilers can have a profound impact on the performance of an application. assume that for a program...