Engineering, 28.11.2019 06:31 6lost6soul6
Abelt moves upward at a steady velocity v, dragging a film of viscous liquid of thickness h. near the belt, the film moves upward due to no-slip. at its outer edge, the film moves downward due to gravity. aligning the y-axis with the belt movement and assuming that the only non-zero velocity is uy, with zero shear stress at the outer film edge, derive a formula for the velocity profile as a function of distance to the belt, uy(x) the average velocity uarg in the film the wall velocity vc for which there is no net flow either up or down and sketch uy/vc vs x/h.
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
Abelt moves upward at a steady velocity v, dragging a film of viscous liquid of thickness h. near th...
Questions in other subjects:
