subject
Engineering, 20.09.2019 20:30 aerisander02

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so, it is no surprise that such clothing has largely replaced thick and heavy old-fashioned coats. consider a jacket made up of six layers of 0.1 mm thick synthetic fabric (k = 0.026w/m. k) with 1.2 mm thick air space (k = 0.026 w/m. k) between the fabric layers. assuming the inner surface temperature of the jacket to be 25˚c and the surface area to be 1.25 m2 , determine the heat loss through the jacket when the temperature of the outdoors is -5˚c and the heat transfer co-efficient of outer surface is 25 w/m2 .k. what would be the thickness of a wool fabric (k = 0.035w/m. k) if the person has to achieve the same level of thermal comfort wearing a thick wool coat instead of a jacket. (30 points)

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
You know the right answer?
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothin...

Questions in other subjects:

Konu
History, 10.01.2020 22:31
Konu
History, 10.01.2020 22:31