Engineering, 13.09.2019 23:30 pyrkest4688

Exhaust gases flowing through a double-pipe heat exchanger at a rate of 0.3 kg/s are to be cooled from 400ºcto 120ºc by water in the annulus initially at 10ºc. the inner pipe has a diameter of 33 cm and negligible thickness. the specific heat capacities of the gases and water may be taken as 1130 and 4190 j/kgk respectively, and the gas and water heat transfer coefficients are 150 and 665 w/m2k. find the heat exchanger length required when the cooling water flow is 0.4 kg/s, (a) for parallel flow and (b) for counter flow.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

You know the right answer?

Exhaust gases flowing through a double-pipe heat exchanger at a rate of 0.3 kg/s are to be cooled fr...