Awater blaster consists of a pump and a petrol water motor. in the pump the pressure of the s from 101.3 kpa to 30 mpa. the outlet temperature is 40°c. determine the velocity of water at the outlet assuming the inlet velocity is negligible and the system is adiabatic. the specific work into the pump is 0.5 kj/kg. calculate the velocity at the outlet.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

The higher the astm grain size number, the finer the gran is. a)-true b)-false