Physics, 21.12.2019 19:31 913003853

Say flat (ballerina style) shoes were good to wear in a lab, why would they be the best compared to trainers and high heels in terms of friction?

Answers: 3

Show answers

Answers

Answer from: Quest

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm. the wire diameter is d = 0.9 mm. the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2) in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

Answer from: Quest

answer: i'm not sure which is which for i get confused on it all the time but i can tell you that the answer lies with the convex and concave devices. i hope this you. have a good day and best of luck to you!

explanation:

For which optical devices does d sometimes have a positive value?

Answer from: Quest

Is a vector quantity that refers to "the rate at which an object changes its position." imagine a person moving rapidly - one step forward and one step back - always returning to the original starting position. while this might result in a frenzy of activity, it would result in a zero velocity. because the person always returns to the original position, the motion would never result in a change in position. since velocity is defined as the rate at which the position changes, this motion results in zero velocity. if a person in motion wishes to maximize their velocity, then that person must make every effort to maximize the amount that they are displaced from their original position. every step must go into moving that person further from where he or she started. for certain, the person should never change directions and begin to return to the starting position.

Answer from: Quest

The radiation of the fire causes the saucepan to heat up. the conduction of the saucepan then to distribute the heat over the saucepan and to give heat to the water. the convection of the water distributing the heat within the water, till all the water is boiling

Other questions on the subject: Physics

Physics, 22.06.2019 00:00, madskate9993

During physical science, ms. greene challenged her students to produce an energy transformation. james and jill wrapped a 4-inch nail with a coil of fifty turns of wire. they connected one end of the coil to one terminal of a knife switch. they connected the other terminal of the knife switch to the battery. finally, they connected the end of the coil to the other terminal of the battery. james held the tip of a 1-inch nail near the flat end of the 4-inch nail. jill closed the knife switch quickly and then opened it. the 1-inch nail was pulled toward the 4-inch nail. what is the best explanation of why the nail moved? a) electrical energy was converted to mechanical energy in the 1-inch nail. b) the 4-inch nail became an electromagnet and the magnetic force attracted the 1-inch nail. c) the electric current in the 4-inch nail was converted to mechanical energy in the 1-inch nail. d) the 4-inch nail had a positive charge and the 1-inch nail had a negative charge. opposites attracted.

Answers: 1

continue

Physics, 22.06.2019 05:30, GreenHerbz206

Could someone . i have tried to solve myself but my calculation is off

Answers: 3

continue

Physics, 22.06.2019 23:30, danielahchf

Which of the following forces require physical contact? tension air resistance friction magnetic force applied force

Answers: 3

continue

Physics, 23.06.2019 01:20, juli8350

What is the state of matter with a specific volume but no definite shape