subject
Physics, 01.08.2019 23:00 bryannnnv

Is the heat you feel when you put your hands above fire conduction convection or radiation

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, markyyy53
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
image
Physics, 21.06.2019 23:30, jjcw000
To do work, this truck uses energy stored in chemical fuel and an electrical battery. how much total energy does this truck put out?
Answers: 1
image
Physics, 22.06.2019 02:30, chelsea73
You are about to open a container of soy milk but notice that there are instructions to “shake well before serving.” the soy milk is most likely a
Answers: 1
image
Physics, 22.06.2019 12:30, lmolder1329
Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.
Answers: 1
You know the right answer?
Is the heat you feel when you put your hands above fire conduction convection or radiation...

Questions in other subjects:

Konu
Mathematics, 12.05.2021 19:50
Konu
Arts, 12.05.2021 19:50
Konu
Mathematics, 12.05.2021 19:50