Amanometer is used to measure the air pressure in a tank. the fluid used has a specific gravity of 1.25, and the differential height between the two arms of the manometer is 28 in. if the local atmospheric pressure is 12.7 psia, determine the absolute pressure in the tank for the cases of the manometer arm with the (a) higher and (b) lower fluid level being attached to the tank.

Rubber on floor tile has a coefficient of kinetic friction of 1.0 and a coefficient of static friction of 2.0. how much force would a 3.5 lb. robot need to produce in order to start moving?

Adelivery truck leaves a warehouse and travels 2.60 km north. the truck makes a left turn and travels 1.25 km west before making another right turn to travel 1.40 km north to arrive at its destination. what is the magnitude and direction of the truck's displacement from the warehouse?

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.