subject
Physics, 16.03.2022 17:30 elloemill

A block of mass 0.247 kg is placed on top of a light, vertical spring of force constant 4 950 N/m and pushed downward so that the spring is compressed by 0.104 m. After the block is released from rest, it travels upward and then leaves the spring. To what maximum height above the point of release does it rise?

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 19:30, smartoa
Two thin 80.0- cm rods are oriented at right angles to each other. each rod has one end at the origin of the coordinates, and one of them extends along the x- axis while the other extends along the yaxis. the rod along the x- axis carries a charge of - 15.0 μ c distributed uniformly along its length, and the other rod carries 15.0 μ c uniformly over its length. find the magnitude and direction of the net electrical force that these two rods exert on an electron located at the point (40.0 cm, 40.0 cm). (e
Answers: 3
image
Physics, 21.06.2019 22:00, moneybaggzay123
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
image
Physics, 22.06.2019 06:20, kimilew
Oxygen undergoes an isentropic expansion from 120 degree c and 280 kpa absolute to 140 kpa absolute. determine the final temperature of the oxygen and the amount of work per kg of o_2 produced in the process if it is adiabatic.
Answers: 1
image
Physics, 22.06.2019 09:40, goofy44
Aturntable a is built into a stage for use in a theatrical production. it is observed during a rehearsal that a trunk b starts to slide on the turntable 10 s after the turntable begins to rotate. knowing that the trunk undergoes a constant tangential acceleration of 0.31 m/s2, determine the coefficient of static friction between the trunk and the turntable.
Answers: 3
You know the right answer?
A block of mass 0.247 kg is placed on top of a light, vertical spring of force constant 4 950 N/m an...

Questions in other subjects:

Konu
Chemistry, 17.07.2019 18:20