18. The diagram below shows three flasks with three different liquids in each of them. hot water initial level of the liquid Liquid A Liquid B Liquid C The volume and temperature of the liquids in the flask are the same. All three flasks were placed inside a hot water trough. The level of the liquids increases. (a) (b) Why does the level of the liquids rises up? The liquids gain heat from the hot water, expand and move upwards Different liquids rises to a different level after heating. Explain the reason. Different liquids expand by different amounts when beated by the same temperature (c) Give one application of this expansion.

Explain what happens at the saturation point when adding salt to water at room temperature.

Which of the following statement is false

The inside surface of a cylindrical-shaped cave of inner diameter 1.0 m is continuously covered with a very thin layer of water. the cave is very long and it is open on both ends. the water on the cave surface is at a constant temperature of 15.5 °c. the cave is constantly exposed to wind such that 15.5 °c air flows through the cave at 4.5 m/s. the kinematic viscosity of the air is 14.66 x 10-6 m2/s and the molecular diffusion coefficient of water vapor in the air is 0.239 x 10-4 m2/s. because the cave diameter is so large, the flow of wind down the length of the cave, in the x direction, can be treated like it is external flow and the cave surface can be approximated as flat where appropriate. calculate the x value, in a) the transition to turbulent flow occurs at rex meters, where the air flow transitions from laminar to turbulent along the inside surface of the cave b) calculate the x value, in meters, where the bulk steady state concentration of water vapor in the air flowing in the cave is 10% of the saturation concentration. assume the air at the surface of the water layer is 100% saturated with water vapor. assume the wind entering the cave contained no moisture before it entered the cave. take into account the transition from laminar to turbulent flow when solving part b