A 300 cm rope under a tension of 120 N is set into oscillation. The mass density of the rope is 120 g/cm. What is the frequency of the first harmonic mode (m

Explanation:

f =

T = 120 N

L = 3.00 m

(m/L) = 120 g/cm(100 cm/m / 1000 g/kg) = 12 kg/m

                                                  (wow that's massive for a "rope")

f = )

f = /6 = 0.527 Hz

This is a completely silly exercise unless this "rope" is in space somewhere as the weight of the rope (353 N on earth) far exceeds the tension applied.

A much more reasonable linear density would be 120 g/m resulting in a frequency of √1000/6 = 5.27 Hz on a rope that weighs only 3.5 N

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

here are some information of the future of geothermal energy:

-the future of geothermal energy can pretty much be summed up with a single word: more

-scientists plan in going deeper than 120 meters

-we are hoping that one day, we will get all of our energy from renewable energy sources such as geothermal energy

hope this !