Physics, 03.12.2021 01:10 stgsry4003

Please help 3. A billiard ball of mass 0.500 kg is rolling along a frictionless pool table with a velocity of 3.5 m/s. It then strikes another billiard ball of equal mass, initially at rest, which moves in a straight line with a velocity of 2.8 m/s.

a) What is the velocity of the first ball after the collision?
b) Is the collision elastic, completely inelastic, or partially inelastic?

4. A truck of mass 2575 kg moving at 11.0 m/s runs into the back of a car that is at rest and has a mass of 825 kg. The two vehicles slide off together.

a) Assuming friction can be ignored, find the velocity of the two vehicles after the collision.
b) Is the collision elastic, completely inelastic, or partially inelastic?

5. A 0.115 kg hockey puck, moving at 35.0 m/s strikes a 0.265 kg octopus sitting on the ice, thrown there by a hockey fan. The puck and octopus slide off together (they stick together). Find the velocity of the puck and octopus.

6. A car of mass 565 kg has a velocity of +25.0 m/s. It strikes a truck of mass 785 kg that has a velocity of +12.0 m/s (in the same direction) from behind. The two vehicles stick together. Find the velocity of the two vehicles after the collision.

7. A red dynamics cart of mass 0.250 kg is rolling with a velocity of 2.0 m/s when it strikes a blue
dynamics cart of mass 0.750 kg that is initially at rest. After the collision, the blue cart has a velocity of +1.0 m/s.
a) Determine the velocity of the red cart after the collision.
b) Is the collision elastic, completely inelastic, or partially inelastic?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:10, caguil00

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Answers: 3

continue

Physics, 22.06.2019 07:10, cschellfamily

Road users moving into your lane, brake lights, and abrupt changes in road surface are a. rare at night b. indicators of potential hazards c. not worth worrying about before you reach them d. no problem for experienced drivers

Answers: 1

continue

Physics, 22.06.2019 12:10, hilljade45

Two forces produce equal torques on a door about the door hinge. the first force is applied at the midpoint of the door; the second force is applied at the doorknob. both forces are applied perpendicular to the door. which force has a greater magnitude?

Answers: 2

continue

Physics, 22.06.2019 13:40, andrespiperderc

Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.

Answers: 1

continue

You know the right answer?

Please help 3. A billiard ball of mass 0.500 kg is rolling along a frictionless pool table with a...