Answers: 1
Physics, 22.06.2019 16:50, lizzepacheco
Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.
Answers: 2
Physics, 22.06.2019 23:40, Demondevilg
Along wire of diameter 1 mm is submerged in an oil bath of temperature ∞ 31°c. the wire has an electrical resistance per unit length of 0.01 ω/m. if a current of 103 a flows through the wire and the convection coefficient is 500 w/m2·k, what is the steady-state temperature of the wire? from the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°c of the steady-state value? the properties of the wire are 8000 kg/m3, 500 j/kg·k, and 20 w/m·k.
Answers: 3
Physics, 23.06.2019 06:30, jaallen3679
Two blocks of aluminum (specific heat c=0.22 cal/g celsius) with masses of 1000 g and 100 g are at a temperature of 70 c. which block has more thermal (internal) energy? explain why?
Answers: 2
When you need to convert from one system of measurement to another, you should convert to the a) sys...
Social Studies, 03.08.2019 19:00
Spanish, 03.08.2019 19:00