Interstellar matter blocks our view of the disk of our galaxy: a. not at all at any wavelength.
b. more-or-less equally at all wavelengths of radio waves to light waves.
c. most at radio wavelengths, where hydrogen absorbs radio waves efficiently, and least at optical wavelengths.
d. more at optical wavelengths, less in the infrared, and not at all at radio wavelengths.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

second mirror gathers light from a faraway object and reflects it to another mirror. - a.

increasing transnational kinetic energy. because the transnational kinetic energy formula consists of only two variables, mass and velocity, increasing one of those properties is the only way to increase an object's transnational kinetic energy. increases to mass and velocity, however, do not have the same impact.

he made 11 calls in one day