Which of the following are the most common types of engine construction? Choose all that apply.
Single Overhead Cam
Dual Overhead Cam
Overhead Valve Engine
Single Stroke Engine

An input force of 7 n is applied to a machine with a mechanical advantage of 1.75. what is the maximum the machine could lift? 12.25 n7n7.25 n26.2 n

A200-n force is applied to the foot-operated air pump. the return spring s exerts a 2.6-n·m moment on member oba for this position. determine the corresponding compression force c in the cylinder bd. if the diameter of the piston in the cylinder is 40 mm, estimate the air pressure generated for these conditions. state any assumptions. enter a positive number for the compression force c.

Avertical clean glass piezometer tube has an inside diameter of d = 1 mm and is used to measure pressure in a horizontal pipe carrying water as shown. due to pressure in the pipe, the water at 20c rises into the tube to a height h. if the water pressure in the pipe is p = 500 pa gauge, estimate the height h: (a) without considering surface tension (b) with surface tension (capillary) effects. the contact angle  can be assumed at 30 deg