Physics, 26.10.2021 01:00 daphnewibranowsky

A simple pendulum oscillates 40 times in 20 second. What is the time period of the pendulum?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 19:30, QueenNerdy889

Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).

Answers: 3

continue

Physics, 22.06.2019 19:30, Bg88860709

Aspacecraft that renters the earth’s atmosphere drastically slows down. the amount of kinetic energy the spacecraft has as it reenters the earths atmosphere

Answers: 2

continue

Physics, 22.06.2019 20:10, hncriciacheichi

Two cannon balls weighing 18 kg and 24 kg are chained together and fired horizontally with a velocity of 165 m/s from the top of a 21-m wall. the chain breaks during the flight of the cannonballs and the 18-kg cannonball strikes the ground at t = 1.5 s, at a distance of 240 m from the foot of the wall, and 7 m to the right of the line of fire. determine the position of the other cannonball at that instant. neglect the resistance of the air.

Answers: 1

continue

Physics, 23.06.2019 07:00, hockejoh000

Conventional hot-water heaters consist of a tank of water maintained at a fixed temperature. the hot water is to be used when needed. the drawback is that energy is wasted because the tank loses heat when it is not in use, and you can run out of hot water if you use too much. some utility companies are encouraging the use of on-demand water heaters (also known as flash heaters), which consist of heating units to heat the water as you use it. no water tank is involved, so no heat is wasted. a typical household shower flow rate is 2.50 gal/min (9.46 l/min ) with the tap water being heated from 51.0 ˚f (10.6 ˚c) to 120 ˚f (48.9 ˚c) by the on-demand heater. what rate of heat input (either electrical of from gas) is required to operate such a unit, assuming that all the heat goes into the water?