subject
Physics, 20.10.2021 23:40 janellesteele9104

Refer to Figure 2-6. If you start from the Bakery, travel to the Art Gallery, and then to the Cafe, in 1.0 hour, what is your average speed in km/h? Distance of Art Gallery to Bakery is 2.5 km, distance of Bakery to Cafe is 4.0 km. Both in the North Direction

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, ambercuevas2707
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt, c and rt, h, and qin, as where rtot rt, c rt, h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc, n 0.05 k/w and rh, n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh, d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th, i tc, i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
image
Physics, 22.06.2019 11:30, swaggyd6603
Write down two additional questions about earth's magnetic field that will make your presentation more informative.
Answers: 1
image
Physics, 22.06.2019 16:50, Jstylez1789
Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =
Answers: 1
image
Physics, 22.06.2019 17:30, s11074739
Which of the choices are parts of an atom? select all that apply. a.) compound b.) electron c.) neutron d.) molecule e.) photon f.) proton g.) element
Answers: 1
You know the right answer?
Refer to Figure 2-6. If you start from the Bakery, travel to the Art Gallery, and then to the Cafe,...

Questions in other subjects:

Konu
Physics, 11.10.2019 05:00
Konu
Health, 11.10.2019 05:00