Physics, 18.10.2021 14:00 kaydeemyylady

State and explain the effect of this fault on the linearity of the thermometer

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 23:10, theh301234

6–55 refrigerant-134a enters the condenser of a residential heat pump at 800 kpa and 358c at a rate of 0.018 kg/s and leaves at 800 kpa as a saturated liquid. if the compressor consumes 1.2 kw of power, determine (a) the cop of the heat pump and (b) the rate of heat absorption from the outside air.

Answers: 2

continue

Physics, 22.06.2019 01:00, Bearboy1564

Asuppose a suitcase has a mass of (m) 30 kg and a net force (n) of 10 kg*m/s. what is the acceleration rate of the suitcasein m/s? show your work to support your answer.

Answers: 3

continue

Physics, 22.06.2019 14:20, jeny89

4r-134a enters the condenser of a residential heat pump at 800 kpa and 50°c at a rate of 0.022 kg/s and leaves at 750 kpa subcooled by 3°c. the refrigerant enters the compressor at 200 kpa superheated by 4°c determine (a) the isentropic efficiency of the compressor, (b) the rate of heat supplied to the heated room, and (c) the cop of the heat pump. also, determine (d) the cop and rate of heat supplied to the heated room if this heat pump operated on the ideal vapor-compression cycle between the pressure limits of 200 and 800 kpa. (0.757, 4.37 kw, 5.12, 6.18, 3.91 kw)

Answers: 3

continue

Physics, 22.06.2019 15:30, tiffuuu

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

continue

You know the right answer?

State and explain the effect of this fault on the linearity of the thermometer...