Pushes and pulls are that can change the of objects. is another word for making a guess.

In a system with only a single force acting upon a body, what is the relationship between the change in kinetic energy and the work done by the force? answers: work is equal to the change in kinetic energy. work depends on the square of the change in potential energy. work is equal to the negative of the change in kinetic energy. work is equal to the square of the change in kinetic energy

An airplane is flying with a velocity of 240 m/s at an angle of 30.0∘ with the horizontal, as the drawing shows. when the altitude of the plane is 2.4km, a flare is released from the plane. the flare hits the target on the ground. what is the angle θ?

Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?