Zach performed several experiments related to gravity. At the end of one experiment, Zach concluded that the gravitational force between two objects is directly proportional to the masses of the objects. Which set of data did Zach use to form this conclusion?
A.
Distance Mass 1 Mass 2 Force
10 m 10 kg 15 kg 1.0 × 10-10 N
10 m 15 kg 15 kg 1.5 × 10-10 N
10 m 10 kg 30 kg 2.0 × 10-10 N
10 m 20 kg 20 kg 2.7 × 10-10 N
10 m 20 kg 30 kg 4.0 × 10-10 N
B.
Distance Mass 1 Mass 2 Force
5 m 10 kg 10 kg 2.7 × 10-10 N
10 m 10 kg 10 kg 6.7 × 10-11 N
15 m 10 kg 10 kg 3.0 × 10-11 N
20 m 10 kg 10 kg 1.7 × 10-11 N
25 m 10 kg 10 kg 1.1 × 10-11 N
C.
Distance Mass Acceleration Time
5 m 5 kg 9.8 m/s2 1.0 s
10 m 5 kg 9.8 m/s2 1.4 s
15 m 5 kg 9.8 m/s2 1.7 s
20 m 5 kg 9.8 m/s2 2.0 s
25 m 5 kg 9.8 m/s2 2.3 s
D.
Distance Mass Acceleration Time
5 m 5 kg 9.8 m/s2 1.0 s
10 m 10 kg 9.8 m/s2 1.4 s
15 m 15 kg 9.8 m/s2 1.7 s
20 m 20 kg 9.8 m/s2 2.0 s
25 m 25 kg 9.8 m/s2 2.3 s

Which articulations allow for greatest range of motion?

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.

Aheat engine running backward is called a refrigerator if its purpose is to extract heat from a cold reservoir. the same engine running backward is called a heat pump if its purpose is to exhaust warm air into the hot reservoir. heat pumps are widely used for home heating. you can think of a heat pump as a refrigerator that is cooling the already cold outdoors and, with its exhaust heat qh, warming the indoors. perhaps this seems a little silly, but consider the following. electricity can be directly used to heat a home by passing an electric current through a heating coil. this is a direct, 100% conversion of work to heat. that is, 19.0 \rm kw of electric power (generated by doing work at the rate 19.0 kj/s at the power plant) produces heat energy inside the home at a rate of 19.0 kj/s. suppose that the neighbor's home has a heat pump with a coefficient of performance of 4.00, a realistic value. note: with a refrigerator, "what you get" is heat removed. but with a heat pump, "what you get" is heat delivered. so the coefficient of performance of a heat pump is k=qh/win. an average price for electricity is about 40 mj per dollar. a furnace or heat pump will run typically 200 hours per month during the winter. what does one month's heating cost in the home with a 16.0 kw electric heater? what does one month's heating cost in the home of a neighbor who uses a heat pump to provide the same amount of heating?