In designing an experiment, O you should not change any factors because that will create changes in your data.
O you should change as many factors as possible to measure the biggest change.
O it is important to only change one factor at a time so you can isolate the effect of the factor.

Write maxwell's equations and discuss the terms involved and the results of each equation in classical electrodynamics. if it is possible to write these equations in integral form, give the integral forms. find the wave equation for electromagnetic waves from the maxwell equations. what is the propagation velocity of electromagnetic waves in space according to the wave equation you find?

Find the momentum for a 2.6-kg brick parachuting straight downward at a constant speed of 8.4 m/s .

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)