Physics, 28.08.2021 17:40 applejulianamoreno

What is kinematics ??? (￣.￣)

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 19:30, 314180

Agymnast dismounts off the uneven bars in a tuck position with a radius of 0.3m (assume she is a solid sphere) and an angular velocity of 2rev/s. during the dismount she stretches out into the straight position, with a length of 1.5m, (assume she is a uniform rod through the center) for her landing. the gymnast has a mass of 50kg. what is her angular velocity in the straight position?

Answers: 2

continue

Physics, 21.06.2019 21:20, KillerSteamcar

The a metal retainer that keeps the rolling elements evenly spaced. n a. seal n b. separator n c. bearing n d outer race

Answers: 1

continue

Physics, 22.06.2019 14:40, kellypechacekoyc1b3

Asolid cylinder and a cylindrical shell have the same mass, same radius, and turn on frictionless, horizontal axles. the cylindrical shell has light-weight spokes connecting the shell to the axle. a rope is wrapped around each cylinder and tied to blocks of equal masses that are held the same height above the ground. both blocks are released simultaneously. the ropes do not slip. which block hits the ground first? or is it a tie?

Answers: 3

continue

Physics, 22.06.2019 15:30, tiffuuu

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

continue

You know the right answer?

What is kinematics ??? (￣.￣)...