Physics, 12.08.2021 16:30 Animallover100
In theory, the coil could be turned over, but the connectors to the coil then make it difficult to move the 2 coils together. What are the differences and why
Answers: 2
Other questions on the subject: Physics
Physics, 21.06.2019 23:00, hunterdylan01
Acoal-fired plant generates 600 mw of electric power. the plant uses 4.8 x 10^6 kg of coal each day, and the heat of combustion of coal is 3.3x 10^7 j/kg. the steam that drives the turbines is at a temperature of 300° c, and the exhaust water is at 37° c. (a) what is the overall efficiency of the plant for generating electric power? (b) how much thermal energy is exhausted each day? (c) what is the change in entropy of the universe for this heat engine? (d) using the same heat reservoirs, what is the maximum possible (carnot) efficiency for a heat engine?
Answers: 1
Physics, 22.06.2019 15:30, Christyy1837
What are the similarities & differences between a thermistor and a light dependent resistor in physics?
Answers: 2
Physics, 22.06.2019 18:50, rurbanok12
8.29 two streams containing pyridine and acetic acid at 25°c are mixed and fed into a heat exchanger. due to the heat-of-mixing effect, it is desired to reduce the temperature after mixing to 25°c using a stream of chilled ethylene glycol as indicated in the diagram. calculate the mass flow rate of ethylene glycol needed. the heat capacity of ethylene glycol at these conditions is approximately 2.8 kj/(kg k), and the enthalpy change of mixing (δmixh) is given below.
Answers: 3
You know the right answer?
In theory, the coil could be turned over, but the connectors to the coil then make it difficult to m...
Questions in other subjects:
Law, 25.07.2020 23:01
History, 25.07.2020 23:01
