Physics, 05.07.2021 09:00 zandariouslee

15. A beam of a partide passes undeflected through crossed electric and magnetic fields with electric field = 6.6 x 10°N/C and magnetic field = 1.27. Their speed in m/s will be

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 00:00, sydneydavis57

Jackson is designing a new heater, and he wants to experiment with different thermally conductive materials. which of these materials would be useful in conducting heat?

Answers: 1

continue

Physics, 22.06.2019 00:30, Hellopeople233

Aball tossed vertically upward from the ground next to a building passes the bottom of a window 1.8 s after being tossed and passes the top of the window 0.20 s later. the window is 2.0 m high from top to bottom. what was the ball's initial velocity? the unit vector j^ is directed upward. how far is the bottom of the window from the launch position? how high does the ball rise above the launch position?

Answers: 1

continue

Physics, 22.06.2019 11:30, azduce

(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?

Answers: 3

continue

Physics, 22.06.2019 19:10, simmonss1185

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

continue

You know the right answer?

15. A beam of a partide passes undeflected through crossed electric and magnetic fields with electri...