Physics, 21.06.2021 14:00 steven0448

Assume we have a 1D print pattern with a resolution (i. e., spatial sampling frequency) of 120 dots per cm, which equals approximately 300 dots per inch (dpi) and a total signal length of N= 2800 samples. Calculate the Sampling interval

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 18:30, Rusven

An experiment is designed to test the relationship between the initial height of a basketball before it is dropped to the height of its rebound bounce. the height of the rebound bounce is measured using a scale positioned behind the ball. in the above experiment, which condition would not be controlled? a). the starting height of the ballb). the surface the ball bounces on c). the type of ball d). the method to measure the rebound height of the ball

Answers: 1

continue

Physics, 22.06.2019 06:00, azaz1819

The magnetic field inside a superconducting solenoid is 4.50 t. the solenoid has an inner diameter of 6.20 cm and a length of 26.0 cm. determine (a) the magnetic energy density in the field and (b) the energy stored in the magnetic field within the solenoid.

Answers: 2

continue

Physics, 22.06.2019 13:40, youngbeauty17

Awind turbine is rotating counterclockwise at 0.5 rev/s and slows to a stop in 10 s. its blades are 20 m in length. (a) what is the angular acceleration of the turbine? (b) what is the centripetal acceleration of the tip of the blades at t=0s? (c) what is the magnitude and direction of the total linear acceleration of the tip of the blades at t=0s?

Answers: 1

continue

Physics, 22.06.2019 21:20, CM0

Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?

Answers: 1

continue

You know the right answer?

Assume we have a 1D print pattern with a resolution (i. e., spatial sampling frequency) of 120 dots...