Physics, 12.06.2021 14:00 nanda22

A uniform bar of length 4.0m and 80kg rest with its upper end against a smooth vertical wall and and with its lower end on the rough surface to coefficient of friction 0.32.What is the maximum angle made with the horizontal to which the bar can be inclined without sliding?

Answers: 1

Show answers

Answers

Answer from: Quest

air exerts forces on falling objects near earth’s surface.

explanation:

the term 'free falls' refer to object that are falling towards the earth, in a situation in which gravity is the only force acting on the object.

for an object in free fall, the acceleration is constant (g, the gravitational acceleration), and so the velocity of the object constantly increases.

for objects near earth's surface, there is always another force acting on the object: the resistance due to the air. this force is opposed to the direction of fall of the object, and it is proportional to the velocity of the object, so as the object falls down, this force increases up to a point when it balances the force of gravity, and the object continues its motion at constant velocity (called terminal velocity). since in this case gravity is not the only force acting on the object, we are not in a situation of free fall.

Answer from: Quest

what experimental evidence led scientists to change from the previous model to this one?

a few of the positive particles aimed at a gold foil seemed to bounce back.

the colors of light emitted from heated atoms had very specific energies.

experiments with water vapor showed that elements combine in specific proportions.

cathode rays were bent in the same way whenever a magnet was brought near them.

Answer from: Quest

Your answer is 32 hope i

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Other questions on the subject: Physics

Physics, 22.06.2019 03:00, lananamr

Dinate system, and a charge q = - 2.00 nc is placed s2 10 n> c. (a) what is the change in electric potential energy when the dipole moment of a molecule changes its orientation with respect to es from parallel to perpendicular? (b) at what absolute temperature t is the average translational kinetic energy 32 kt of a molecule equal to the change in potential energy calculated in part(: abovethistemperature, thermalagitationprevents the dipoles from aligning with the electric field.) placed in a uniform electric field e with magnitude 1.6 * 6 on the positive x-axis at x = 4.00 cm. (a) if a third charge q3 = +6.00 nc is now placed at the point x = 4.00 cm, y = 3.00 cm, find the x- and y-components of the total force exerted on this charge by the other two. (b) find the magnitude and direction of figure p21.62 ll uu 21.55 . torque on a dipole. an electric dipole with dipole moment ps is in a uniform external electric field es. (a) find the orientations of the dipole for which the torque on the dipole is zero. (b) which of the orientations in part (a) is stable, and which is unstable? (hint: consider a small rotation away from the equi- librium position and see what happens.) (c) show that for the stable orientation in part (b), the dipoleâ€™s own electric field tends to oppose the external field. 21.62 ..

Answers: 1

continue

Physics, 22.06.2019 03:30, Bryanguzman2004

Two polarizers are oriented at 24.0∘ to one another. light polarized at a 12.0-degree angle to each polarizer passes through both. what is the transmitted intensity (%)?

Answers: 2

continue

Physics, 22.06.2019 10:30, jadenp23

Which two particles are found in the center of an atom

Answers: 1

continue

Physics, 22.06.2019 13:00, help1572

Aplayground merry-go-round has a radius of 4.6 m and a moment of inertia of 200 kg-m2 and turns with negligible friction about a vertical axle through its center. a child applies a 26.0 n force tangentially to the edge of the merry-go-round for 15.0 seconds. if the merry-go-round is initially at rest, how much work did the child do on the merry-go-round?

Answers: 1

continue

You know the right answer?

A uniform bar of length 4.0m and 80kg rest with its upper end against a smooth vertical wall and and...