Two 100 ohm resistors are connected inparallel and one identical resister in series. The maximum power that can be delivered to any one resistor is 25W. What is the maximum voltage that can be applied between the terminals A and B ? A. 50V
B. 75V
C. 100V
D. 125V
​

Moon effect. some people believe that the moon controls their activities. if the moon moves from being directly on the opposite side of earth from you to being directly overhead, by what percentage does (a) the moon's gravitational pull on you increase and (b) your weight (as measured on a scale) decrease? assume that the earth–moon (center-to-center) distance is 3.82 × 10^8 m, earth's radius is 6.37 × 10^6 m, moon's mass is 7.36 × 10^22 kg, and earth's mass is 5.98 × 10^24 kg.

Consider a one meter long horizontal pipe with a constant 100 cm^2 cross sectional area. water flows rightward into the pipe at x = 0 with flow velocity 02m/sec at every point within the pipe intake area. at x=1, the rightward flow rate is 0.192 m/sec. assume the water is a conserved quantity in the pipe, so there must be a leak (a sink) somewhere in the pipe. 1. compute net volumetric flow of the source if the system to be in equilibrium. 2. now assume the pipe in the problem has no leaks. compute the net volumetric rate of change for the system.

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.