Physics, 28.05.2021 01:00 Grumbley8301
In a plate glass factory, sheets of glass move along a conveyor belt at a speed of 15.3 cm/s. An automatic cutting tool descends at preset intervals to cut the glass to size. Since the assembly belt must keep moving at constant speed, the cutter is set to cut at an angle to compensate for the motion of the glass. The glass is 73.4 cm wide and the cutter moves from one edge to the other in 3.0 s. At what angle to the width of the sheet should the cutter be set to move?
Answers: 2
Other questions on the subject: Physics
Physics, 22.06.2019 00:30, juansantos7b
Using the work energy theorem. what is the velocity of a 850kg car after starting at rest when 13,000j of work is done to it.
Answers: 1
Physics, 22.06.2019 09:00, bendmads04
In a heat engine if 1000 j of heat enters the system the piston does 500 j of work, what is the final internal energy of the system if the initial energy was 2000 j? 1. write the equation 2.list out your known variables 3.plug the numbers into the equations 4.solve 5.write your solution statement that includes initial energy and final
Answers: 1
Physics, 22.06.2019 18:10, coryowens44
Arefrigerator uses r-134a as the working fluid and operates on the ideal vapor-compression refrigeration cycle except for the compression process. the refrigerant enters the evaporator at 120 kpa with a quality of 34 percent and leaves the compressor at 70°c. if the compressor consumes 450 w of power, determine (a) the mass flow rate of the refrigerant, (b) the condenser pressure, and (c) the cop of the refrigerator. (0.00644 kg/s, 800 kpa, 2.03)
Answers: 1
You know the right answer?
In a plate glass factory, sheets of glass move along a conveyor belt at a speed of 15.3 cm/s. An aut...
Questions in other subjects:
English, 17.11.2019 11:31
English, 17.11.2019 11:31
History, 17.11.2019 11:31
