The pressure of a hydraulic fluid in a cylinder is 627 Pa. The area of a piston inside the cylinder is 0.900 m2. Calculate the force that is exerted on the piston using the formula for calculating force. • 697 N
• 626 N
• 628 N
• 564 N

A12-kg bag of groceries is tossed onto a table at 4.0 m/s and slides to a stop in 2.2 s . modify the equation fδt=δ (mv) to find the force of friction.

The force will determine the acceleration.

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)