Physics, 25.05.2021 09:50 cynayapartlow88

what is the focalength of the combination of two thin renses of power -5D and -2D placeci in contact with each other?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 14:20, jadahilbun01

A1-lb collar is attached to a spring and slides without friction along a circular rod in a vertical plane. the spring has an undeformed length of 5 in. and a constant k =25 lb/ft. knowing that the collar is released from being held at a determine, the speed of the collar and the normal force between the collar and the rod as the collar passes through b.

Answers: 3

continue

Physics, 22.06.2019 18:00, maren17

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)

Answers: 3

continue

Physics, 22.06.2019 22:50, jnthnsngh

When a pair of 10-n forces act on a box of candy, the net force on the box is a 20 n. b about 14 n. c zero. d any of the above depending on the directions of forces.

Answers: 1

continue

Physics, 23.06.2019 00:00, hokamidat

You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.

Answers: 1

continue

You know the right answer?

what is the focalength of the combination of two thin renses of power -5D and -2D placeci in contact...