Physics, 09.05.2021 14:50 Amholloway13
The block in the drawing has dimensions L0×2L0×3L0, where L0 =0.5 m. The block has a thermal conductivity of 250 J/(s·m·C˚). In drawings A, B, and C, heat is conducted through the block in three different directions; in each case, the temperature of the warmer surface is 35 ˚C and that of the cooler surface is 14 ˚C Determine the heat that flows in 2 s for each case.
Answers: 2
Physics, 22.06.2019 11:30, azduce
(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?
Answers: 3
Physics, 22.06.2019 16:50, Jstylez1789
Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =
Answers: 1
The block in the drawing has dimensions L0×2L0×3L0, where L0 =0.5 m. The block has a thermal conduct...
Mathematics, 26.05.2021 17:20
Chemistry, 26.05.2021 17:20
Biology, 26.05.2021 17:20
Mathematics, 26.05.2021 17:20
Mathematics, 26.05.2021 17:20
English, 26.05.2021 17:20
English, 26.05.2021 17:20