PLEASE HELP ITS ANATOMY AND PHYS GIVE ACTUALLY ANSWERS NOT LINKS FOR TRYING TO GET MY IP OR I'LL REPORT YOU Part 1

Your task for this lab will be to practice your bedside manner by talking to a hypothetical patient who has just been diagnosed with type II diabetes. You’ll talk them through the following:

how to monitor their insulin levels regularly
how to recognize when they may be suffering from low blood sugar
how to administer insulin, with a demonstration

Your patient understands the basics of their condition and will follow the regimen you propose but has come to you for more specific advice. Your patient is a teenager and is accompanied by their parent, so your advice and demonstration will be given to both the patient and their guardian.

Part 2

After you have thoroughly researched the topic, organize your notes for a two-part presentation. You need to physically demonstrate how to use a blood-glucose monitor and how to self-administer insulin shots. You may need to use physical actions or props for this, such as a Popsicle stick or pencil representing a blood glucose monitor or syringe.

You also need to present the type II diabetes diagnosis to your patient in a way that answers the most common questions you think they might have.

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

The energy released by a chemical reaction can be measured using a calorimeter. when barium hydroxide octahydrate crystals are reacted with dry ammonium chloride inside of a coffee cup calorimeter, the temperature of the 18.00 g of water in the calorimeter decreases from 30.0°c to 8.0°c. the equation for calculating energy absorbed or released by a reaction is: where q is the energy released or absorbed, m is the mass of water in the calorimeter, cp is the specific heat of water, and δt is the observed temperature change. if the specific heat of liquid water is 4.19 j/g·°c, how much energy was absorbed by the reaction?

Hydrogen atoms are excited by a laser to the =4n=4 state and then allowed to emit. what is the maximum number of distinct emission spectral lines (lines of different wavelengths) that can be observed from this system? 8 6 2 7 4 5 1 3 calculate the wavelength of the 4⟶14⟶1 transition. =λ=