Your mother is sure that you are driving too fast because she knows

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

Arod of some material 0.20 m long elongates 0.20 mm on heating from 21 to 120°c. determine the value of the linear coefficient of thermal expansion [in (degrees c)^-1] for this material.

Unpolarized light falls on two polarizer sheets whose transmission axes are at right angles. a third polarizer is placed between the first two so that its axis makes a 52-degree angle with the axis of the first polarizer. a) what fraction of the incident light intensity is transmitted through the first polaroid? b) what fraction of the incident light intensity is transmitted through the second polaroid? c) what is the angle of polarization of the light that enters the third polaroid? d) what fraction of the incident light intensity is transmitted through the third polaroid. e) what happens if the middle polaroid is removed?