subject
Physics, 26.12.2019 08:31 arturocarmena10

If you were trying to design the most efficient fission reactor possible, what ratio of u-235 to u-238 would you want? explain why.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:30, elijahdecent6070
Under conditions for which the same room temperature is maintained by a heating or cooling system, it is not uncommon for a person to feel chilled in the winter but comfortable in the summer. provide a plausible explanation for this situation (with supporting calculations) by considering a room whose air temperature is maintained at 20â°c throughout the year, while the walls of the room are nominally at 27â°c and 14â°c in the summer and winter, respectively. the exposed surface of a person in the room may be assumed to be at a temperature of 32â°c throughout the year and to have an emissivity of 0.90. the coefficient associated with heat transfer by natural convection between the person and the room air is approximately 2 w/m2 â‹…â‹… k. what is the ratio of the thermal resistance due to convection to the thermal resistance due to radiation in the summer? what is the ratio of thermal resistances in the winter
Answers: 1
image
Physics, 22.06.2019 16:50, lizzepacheco
Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.
Answers: 2
image
Physics, 22.06.2019 21:30, CM0
Ateacher gives students four liquids commonly found in the kitchen - vinegar, apple juice, dish detergent, and milk - and ph indicator strips, which measure acidity. the teacher asks the students to put the liquids in order from most acidic to most basic. what type of investigation could the students conduct to determine the correct order for the liquids?
Answers: 3
image
Physics, 22.06.2019 22:30, shadowz8813
Materials will have different energies associated with the electrons inside them. this is related to how strongly bound they are by their work function. if we sandwich a material with a very low energy between two materials with a high energy, we create a trap for an electron. if this trap is very narrow in one direction in comparison to the others, this is approximately a 1-dimensional box that confines the electron. what is the lowest energy of an electron in the box if the thinnest direction across the materials is 4.81 nm?
Answers: 3
You know the right answer?
If you were trying to design the most efficient fission reactor possible, what ratio of u-235 to u-2...

Questions in other subjects:

Konu
Mathematics, 28.01.2021 20:00