subject
Physics, 17.11.2019 12:31 k3thagoat

Amaterial that is can be pounded into shapes

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 15:00, jamaiciaw6
How to calculate voltage drop in a series circuit
Answers: 1
image
Physics, 23.06.2019 08:30, 01222002
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
image
Physics, 23.06.2019 11:00, mello812
Research and discuss the aurora borealis in terms of electric charges, magnetic fields, and forces. which times of the year are best for seeing the northern lights, and where are the best places to view them? explain your answers. also identify links to good images. if you’ve ever seen the aurora borealis, describe your experience and note the time and place that you saw it.
Answers: 2
image
Physics, 23.06.2019 13:00, djwattam
5400 j of energy are given off when a 50 g of aluminum pan changes temperature. does the temperature of the pan increase or decrease and by how much
Answers: 1
You know the right answer?
Amaterial that is can be pounded into shapes...

Questions in other subjects:

Konu
Mathematics, 11.06.2021 23:00
Konu
Mathematics, 11.06.2021 23:00