Determine for which class of lever the output force is always greater than the input force. for which class is the output force always less than the input force?

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

1point) a skydiver weighing 130 lb (including equipment) falls vertically downward from an altitude of 14,000 ft and opens the parachute after 20 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.85|v|0.85|v| when the parachute is closed and is of magnitude 17|v|17|v| when the parachute is open, where the velocity vv is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. find the speed of the skydiver when the parachute opens. speed is 150.6121788 ft/s find the skydiver's height when the parachute opens. height is 2338.98591 ft find the limiting velocity vlvl after the parachute opens. (think about whether this should be positive or negative.) vl=vl= 7.647 ft/s

Atomic nuclei of almost all elements consist of