What is the mass of a crate if a force of 200 n causes it to accelerate at 8 m/s2? (formula: f=ma)

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

This is important 1. what happens to the speed of molecules in water vapor when it condenses to form a liquid? (2 points) the molecules slow down. the molecules speed up. the molecules slow down and then speed up. the molecules speed up and then slow down. 2. how might human activities change to compensate for a decrease in water supplies? (2 points) humans might build a factory. humans might build drainage systems. humans might extract more water from the ground. human behavior does not change because of the water cycle. i'll be grateful if anyone can answer these 2 questions !

Air is contained in a variable-load piston-cylinder device equipped with a paddle wheel. initially, air is at 400 kpa and 17°c. the paddle wheel is now turned by an external electric motor until 75 kj/kg of work has been transferred to air. during this process, heat is transferred to maintain a constant air temperature while allowing the gas volume to triple. calculate the required amount of heat transfer in kj/kg.