Physics, 17.10.2019 08:00 laureanogabriel

If all the strings on the guitar in the picture were plucked and allowed to vibrate freely, the string at the top would produce the highest pitched sound. what could be concluded about the rate of vibration of the strings? the rates of vibration would vary over time for each string. there is no way to tell which string would be vibrating faster. the bottom string would be vibrating the fastest. the top string would be vibrating the fastest.

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 03:10, joho38

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Answers: 2

continue

Physics, 22.06.2019 03:40, srtero

Aprojectile is launched from ground level with an initial velocity of v 0 feet per second. neglecting air resistance, its height in feet t seconds after launch is given by s equals negative 16 t squared plus v 0 t. find the time(s) that the projectile will (a) reach a height of 192 ft and (b) return to the ground when v 0equals112 feet per second. (a) find the time(s) that the projectile will reach a height of 192 ft when v 0equals112 feet per second. select the correct choice below and, if necessary, fill in the answer box to complete your choice.

Answers: 1

continue

Physics, 22.06.2019 06:00, azaz1819

The magnetic field inside a superconducting solenoid is 4.50 t. the solenoid has an inner diameter of 6.20 cm and a length of 26.0 cm. determine (a) the magnetic energy density in the field and (b) the energy stored in the magnetic field within the solenoid.

Answers: 2

continue

Physics, 22.06.2019 12:10, davidoj13

Awater slide of length l has a vertical drop of h. abby's mass is m. an average friction force of magnitude f opposes her motion. she starts down the slide at initial speed vi. use work-energy ideas to develop an expression for her speed at the bottom of the slide. then evaluate your result using unit analysis and limiting case analysis. express your answer in terms of the variables h, m, l, vi, f and appropriate constants. vf v f

Answers: 2

continue

You know the right answer?

If all the strings on the guitar in the picture were plucked and allowed to vibrate freely, the stri...