Achemical reaction takes place in which energy is absorbed. arrange the characteristics of the reaction in order from start to finish. tiles lower energy of reactants higher energy of products higher energy of reactants transition state lower energy of products sequence

Wo audio speakers are placed on a vertical rail. speaker a is placed at head-level while speaker b is place at some variable height, \delta yδy, above speaker a. both speakers receive simultaneous input from a sine-wave generator so the speakers each produce a pure sinusoidal sound wave with a wavelength of 0.531 meters. calculate the lowest height that speaker b can be placed above speaker a to produce a minimum of sound heard by person standing \delta x = 7.86δx=7.86 meters directly in front of speaker a.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

The discovery of the electron as a subatomic particle was a result of